Sea Chest Filter - Marine Seawater Filter Element Sea Chest Filter Sea Chest Strainers

SEA TANK FILTER - MARINE SEAWATER FILTER ELEMENT
SEA CHEST FILTER SEA CHEST STRAINERS

AS WE ALL KNOW, SEA CHEST FILTER SEA CHEST STRAINERS IS THE INTERNAL COMPONENT OF OUR SHIP'S SEAWATER FILTER - THE FILTER BARREL. WHEN THE SHIP ENTERS THE DOCK FOR MAINTENANCE, WE WILL PERIODICALLY INSPECT THE FILTERING DEVICE IN THE SHIP'S SEAWATER SYSTEM. WHEN IT IS FOUND THAT THE FILTER BARREL INSIDE THE SEAWATER FILTER IS SEVERELY CORRODED AND THE BODY OF THE SEAWATER FILTER IS STILL INTACT, WE CAN ONLY REPLACE THIS FILTER BARREL AT THIS TIME.

HERE WE WILL GIVE YOU A BRIEF INTRODUCTION TO THE TWO SEA CHEST FILTER-SEA CHEST STRIINERS WE JUST DELIVERED:

THE CUSTOMER HAS REPLACED THE INTERNAL FILTER BARREL OF THE JIS F7121 JAPANESE STANDARD CYLINDRICAL SEAWATER FILTER THIS TIME. AS THIS SEAWATER FILTER HAS NOT BEEN DISASSEMBLED ON BOARD, IT IS NOT POSSIBLE TO CONDUCT DIMENSIONAL MEASUREMENTS FIRST. WE HAVE PROVIDED CUSTOMERS WITH MEASUREMENT MODEL DRAWINGS FOR THEIR REFERENCE:

AFTER OBTAINING THE MEASUREMENT DATA, WE NEED TO CONSIDER CUSTOMIZING THE MATERIAL WALL THICKNESS OF THIS SEAWATER FILTER BARREL (SEA CHEST FILTER SEA CHEST STRAINERS). USUALLY, TO REDUCE WELDING DEFORMATION, WE CAN CHOOSE (3MM, 4MM, OR 5MM):

AFTER DETERMINING THE MATERIAL WALL THICKNESS, WE NEED TO DETERMINE THE FILTRATION ACCURACY OF THE SEAWATER FILTER BASED ON ITS WORKING ENVIRONMENT. THIS STEP IS VERY IMPORTANT, AND IT IS NORMAL TO HAVE (MESH 3MM, MESH 4MM, OR MESH 5MM):

THE TWO SEA CHEST FILTER-SEA CHEST STRAINERS WE DELIVERED TO THE CUSTOMER THIS TIME HAVE A SPECIAL FEATURE, WITH A VERY FINE FILTRATION ACCURACY - MESH-16 MESH. THEREFORE, WE USED THE LINING METHOD TO RE LINE THE INTERIOR OF THE SEAWATER FILTER BARREL WITH 16 MESH STAINLESS STEEL WIRE MESH TO ACHIEVE THE CUSTOMER'S FILTRATION ACCURACY (AS SHOWN IN THE FOLLOWING FIGURE):

FINALLY, LET'S APPRECIATE THIS MODEL (SEA CHEST FILTER SEA CHEST STRIINERS) FROM MULTIPLE PERSPECTIVES: